Filter
Top Products
E48SR12007_05222008
2
TECHNICAL SPECIFICATIONS
(T
A
=25°C, airflow rate=300 LFM, V
in
=48Vdc, nominal Vout unless otherwise noted.)
PARAMETER NOTES and CONDITIONS E48SR12007 (Standard)
Min. Typ. Max. Units
ABSOLUTE MAXIMUM RATINGS
Input Voltage
Continuous 80 Vdc
Transient (100ms) 100ms 100 Vdc
Operating Temperature Refer to Figure21 for measuring point -40 115 °C
Storage Temperature -55 125 °C
Input/Output Isolation Voltage 2250 Vdc
INPUT CHARACTERISTICS
Operating Input Voltage 36 75 Vdc
Input Under-Voltage Lockout
Turn-On Voltage Threshold 33 34 35 Vdc
Turn-Off Voltage Threshold 31 32 33 Vdc
Lockout Hysteresis Voltage 1 2 3 Vdc
Maximum Input Current 100% Load, 36Vin 3.0 A
No-Load Input Current 60 100 mA
Off Converter Input Current 3 10 mA
Inrush Current (I
2
t) 1 A
2
s
Input Reflected-Ripple Current P-P thru 12µH inductor, 5Hz to 20MHz 25 mA
Input Voltage Ripple Rejection 120 Hz 50 dB
OUTPUT CHARACTERISTICS
Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25°C 11.880 12.000 12.120 Vdc
Output Voltage Regulation
Over Load Io=Io,min to Io,max ±10 ±15 mV
Over Line Vin=36V to 75V ±10 ±15 mV
Over Temperature Tc=-40°C to 85°C ±100 mV
Total Output Voltage Range Over sample load, line and temperature 11.76 12.24 Vdc
Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth
Peak-to-Peak Full Load, 1µF ceramic, 10µF tantalum 40 120 mV
RMS Full Load, 1µF ceramic, 10µF tantalum 10 25 mV
Operating Output Current Range 0 7 A
Output Over Current Protection 110 140 %
DYNAMIC CHARACTERISTICS
Output Voltage Current Transient 48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs
Positive Step Change in Output Current 50% Io.max to 75% Io.max 200 360 mV
Negative Step Change in Output Current 75% Io.max to 50% Io.max 200 360 mV
Settling Time (within 1% Vout nominal) 200 us
Turn-On Transient
Start-Up Time, From On/Off Control 6 12 ms
Start-Up Time, From Input 6 12 ms
Maximum Output Capacitance Full load; 5% overshoot of Vout at startup 2000 µF
EFFICIENCY
100% Load 92.0 %
60% Load 92.0 %
ISOLATION CHARACTERISTICS
Input to Output 2250 Vdc
Isolation Resistance 100 MΩ
Isolation Capacitance 1500 pF
FEATURE CHARACTERISTICS
Switching Frequency 350 kHz
ON/OFF Control, Negative Remote On/Off logic
Logic Low (Module On) Von/off at Ion/off=1.0mA 0 0.7 V
Logic High (Module Off) Von/off at Ion/off=0.0 µA 2.4 18 V
ON/OFF Control, Positive Remote On/Off logic
Logic Low (Module Off) Von/off at Ion/off=1.0mA 0 0.7 V
Logic High (Module On) Von/off at Ion/off=0.0 µA 2.4 18 V
ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 0.7 1 mA
Leakage Current (for both remote on/off logic) Logic High, Von/off=15V 50 uA
Output Voltage Trim Range
Pout ≦ max rated power
-10 10 %
Output Voltage Remote Sense Range
Pout ≦ max rated power
10 %
Output Over-Voltage Protection Over full temp range; 14.4 V
GENERAL SPECIFICATIONS
MTBF Io=80% of Io, max; Ta=25°C, airflow rate=200FLM 2.03 M hours
Weight 19.6 Grams
Over-Temperature Shutdown Refer to Figure 21 for measuring point 120 °C