Delta Electronics TP-PCC Network Card User Manual


  Open as PDF
of 2
 
2
TPPCC (Copy HMI program to PCC) PCCTP (Copy program in PCC to HMI)
If the model type of TP does not correspond with the
model type of program of PCC.
(TP04G program and TP02G program can’t be used
each other)
TP will display:
TP series and PCC is different
Press Enter to Confirm
TP seriesPCC
Press Esc to Exit
If there is no program in PCC.
TP will display:
The PCC is Empty
PCC TP series is illegal
If the model type of TP does not correspond with the
model type of program of PCC.
TP series and PCC is different
Please Remove the PCC
and Reboot
If the model type of TP corresponds with the model type
of program of PCC.
TP will display:
Press Enter to Confirm
TP seriesPCC
Press Esc to Exit
Press <Enter> to confirm to copy.
When executing “writing in” (data is transmitting and
indication LED of RS-485 will light)
TP will display:
TP series PCC
Please wait!
If the model type of TP corresponds with the model type
of program of PCC.
TP will display:
Press Enter to Confirm
TP seriesPCC
Press Esc to Exit
Press <Enter> to confirm to copy.
When executing “writing in” (data is transmitting and
indication LED of RS-485 will light)
TP will display:
PCC TP series
Please wait!
When completing transmitting, TP will display:
Please Remove the PCC and Reboot
Please turn the power off and remove PCC from TP. At
this time, all program and system settings have copied
to PCC.
When completing transmitting, TP will display:
Please Remove the PCC and Reboot
Please turn the power off and remove PCC from TP. At
this time, all program and system settings have copied
to PCC.
5 DIMENSION AND INSTALLATION
(Unit: mm)
 previous