Denso GT-10 Barcode Reader User Manual


 
ON/OFF function:
The scanner is in standby mode when the
Magic Key is off.
Transfer of selected characters
The data to be transmitted (e.g. opera-
tion start codes) can be set beforehand
when the Magic Key is on
Retransmit scanned data
Scanned data can be retransmitted when
the Magic Key is on without the bar code
having to be scanned again
User-friendly
Very practice-orientated
Marking function (GT-10Q):
laser lighting of the scan area and its
centre point
Vibrator function:
Completion of the scanning operation
confirmed with vibration
Adjustable buzzer volume:
3 levels of buzzer volume to suit the
surrounding environment
Very bright, three-colour LED:
Easy to read scanning information
Technical Data
(1): Ambient illumination 500 lux, ITF/16 columns on label, when PCS= 0.9.
(2): An attempt to make a connection may fail ifthe PC or USB hub used is notcompatible. Check transfer compatibility.
(3): Testvalue, not guaranteed.
Simple set-up with intuitive software
Installation software included in scope of
delivery
Easy parameter setting from a PC with
the set-up software
Quick start programme:
Printing and configuring barcodes with
the aid of the special installation soft-
ware – the GT-10 is ready immediately
User-friendly
GT-10B GT-10Q
GT-10B-SM(Standard Range Type) GT-10B-LM(Long Range Type) GT-10Q-SR GT-10Q-SU
(RS-232C) (USB)
Scanner Readable Codes Bar Codes EAN-13/8, UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5, STF, CODABAR (NW7), CODE39, CODE93,
CODE128 (EAN-128), MSI, Plessey
2 Dimensional Codes QR Codes, Micro QR Codes, DataMatrix
(ECC200), PDF417, Maxi Code,
RSSvariants, Micro
Resolution Bar Codes 0.125 mm 0.19 mm 0.15 mm
2 Dimensional Codes 0.25 mm
Image capture funktion Ja
Focusing point 100 mm
Marker Scanning area marker
Scanning area (at Narrow bar 0,5 mm)
(1)
0 ~ 350 mm max 0 ~ 700 mm max
PCS value 0.45 min
Scanning angle (angle of elevation) 40° a
Skew angle 360 degrees
Elevation and inclination ± 35 degrees
Reading confirmation Blue-green-red LED, buzzer (with volume control), vibrator
I/F Format/Connector Type/Cable Length Multi Interface: programmable as RS-232C or keyboard interface RS-232C/ USB 1.1 Compliant/
Dsub-9S USB Typ A
Input Power Operating Voltage Range 4.75 ~ 5.25 V
Power Consumption While Scanning: 200 mA max
Power supply AC adapter Supply from
connected device
(2)
Environmental Water proof IP 54 (Equivalent to JISSplash resistance)
Requirements Shock-resistant 2 m (1 x 6 directions onto concrete floor)
(3)
Operating Temperature Range 0 °C~ 50 °C
Operating Humidity 10 ~ 90 % RF (No condensation or frost) 10 ~ 99 % RF
(No condensation or frost)
Operating ambient illumination 500 lux ~ 10 000 lux (daylight florescent lighting) 20 lux~ 10 000 lux (daylight florescent lighting)
Weight (unit only) Approx. 190 g (without cable) Approx. 210 g (without cable)