Filter
Top Products
59
3
Award BIOS Setup Utility
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting, which
is 128M.
AGP Mode
This field is used to select the AGP mode of the AGP card installed
on the mainboard. The default setting is “4X”.
AGP Driving Control
Set this field to Manual only if there are compatibility problems with
some AGP cards. When set to Manual, you must select a value in the
“AGP Driving Value” field.
Phoenix - AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
The settings on the screen are for reference only. Your version may not be
identical to this one.
Item Help
Menu Level
↑↓→← Move
F6:Fail-Safe Defaults F7:Optimized Defaults
F1:General HelpEnter:Select
F5:Previous Values
+/-/PU/PD:Value F10:Save ESC:Exit
AGP Aperture Size
AGP Mode
AGP Driving Control
AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master 1 WS Read
128M
4X
Auto
DA
Enabled
Enabled
Enabled
X
3.1.3.2 AGP & P2P Bridge Control
Move the cursor to this field and press <Enter>. The following
screen will appear.