Filter
Top Products
Dialogic Corporation © 2004–2008
Understanding LED Signals
LEDs on the Mounting Bracket
The LEDs on the mounting bracket provide
information about the status of the different systems
on the board. To identify and locate these LEDs, see
Figure 4.
Figure 4. End Panel LEDs
The following tables describe how the end panel
LEDs provide information:
Board Status LED
Channel LEDs
LEDs on the Fax Board
The LEDs on the board provide information about the
status of the board. To locate these LEDs, see
Figure 5.
The following table describes how the LEDs on the
board provide information:
* DSP1 and its associated LED are only loaded on the 8
port version of the board.
Figure 5. Dialogic® Brooktrout® TR1034 Analog PCI
Series Board
Using the Dialogic®
Brooktrout® TR1034 Analog
Fax Board
Once you have installed the TR1034 Analog Fax
Board, install and configure your fax or voice
software application according to instructions
included with the software.
Getting Help
Dialogic provides technical support for customers
who have purchased hardware or software products
from Dialogic. If you purchased products from a
reseller, please contact that reseller for technical
support.
This equipment contains no user serviceable parts and
is not intended for repair by unauthorized personnel.
If you experience problems with the TR1034 Analog
Fax Board, for repair or warranty information, please
use the contact information below. If the equipment is
causing harm to the telephone network, the telephone
company might request that you disconnect the
equipment until the problem is resolved.
To obtain technical support, please use the website
To
obtain technical support, please use the website:
www.dialogic.com/support
:
Copyright and Legal Notice
Copyright © [2004-2008] Dialogic Corporation. All Rights Reserved. You may not
reproduce this document in whole or in part without permission in writing from Dialogic
Corporation at the address provided below.
All contents of this document are subject to change without notice and do not represent a
commitment on the part of Dialogic Corporation or its subsidiaries. Reasonable effort is
made to ensure the accuracy of the information contained in the document. However, due
to ongoing product improvements and revisions, Dialogic Corporation and its subsidiaries
do not warrant the accuracy of this information and cannot accept responsibility for errors
or omissions that may be contained in this document.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH
DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT. EXCEPT AS EXPLICITLY SET FORTH BELOW OR AS PROVIDED IN A
SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO
LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS
INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY
INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in medical, life saving, life sustaining, critical
control or safety systems, or in nuclear facility applications.
It is possible that the use or implementation of any one of the concepts, applications, or
ideas described in this document, in marketing collateral produced by or on web pages
maintained by Dialogic Corporation or its subsidiaries may infringe one or more patents or
other intellectual property rights owned by third parties. Dialogic Corporation or its
subsidiaries do not provide any intellectual property licenses with the sale of Dialogic
products other than a license to use such product in accordance with intellectual property
owned or validly licensed by Dialogic Corporation or its subsidiaries. More detailed
information about such intellectual property is available from Dialogic Corporation's legal
department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9.
The software referred to in this document is provided under a Software License
Agreement. Refer to the Software License Agreement for complete details governing the
use of the software.
Dialogic Corporation encourages all users of its products to procure all necessary
intellectual property licenses required to implement any concepts or applications and does
not condone or encourage any intellectual property infringement and disclaims any
responsibility related thereto. These intellectual property licenses may differ from country
to country and it is the responsibility of those who develop the concepts or applications to
be aware of and comply with different national license requirements.
Dialogic, Dialogic Pro, Brooktrout, Cantata, SnowShore, Eicon, Eicon Networks,
Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, Realblocs, Realcomm 100, NetAccess,
Instant ISDN, TRXStream, Exnet, Exnet Connect, EXS, ExchangePlus VSE, Switchkit,
N20, Powering The Service-Ready Network, Vantage, Connecting People to Information,
Connecting to Growth and Shiva, among others as well as related logos, are either
registered trademarks or trademarks of Dialogic.
Board Status LED Meaning
Flashing yellow
(1.5 second rate)
Board is powered up and is
passing self test checks.
Steady red Board is powered up, and the self
test has failed.
Flashing yellow
and green
Board is powered up and is
downloading firmware.
Flashing green
(1 second rate)
Firmware is downloaded, and the
board is in service.
Solid green Board is hung, needs to be reset.
Flickering red Board has failed, needs to be reset.
Off Board has no power, or board is
hung and needs to be reset.
Channel LEDs Meaning
Off Channel is on hook.
Flashing at 0.5 second rate Channel is off hook.
Flashing at Ring Cadence
*
* Ring Cadence varies country by country.
Incoming ring signal.
Connector B
Board Status LED
Channel LEDs
Connector A
A
B
BOARD
STATUS
CHANNEL
1
3
5
7
0
2
4
6
LED Meaning
DSP0 Displays the status for DSP0 that supports the
four ports on the A connector (RJ-45). After
the firmware is loaded and during normal
execution, this LED blinks about every
second. If the LED is not blinking, the DSP0
firmware is not running.
DSP1* Displays the status for DSP1 that supports the
four ports on the B connector (RJ-45). After
the firmware is loaded and during normal
execution, this LED blinks about every
second. If the LED is not blinking, the DSP1
firmware is not running.
Power Steady green indicates good board power.
PCI Connector
LEDs
DS6 - DSP0
DS7 - DSP1
DS8 - Power
Status LEDs
RJ-45 Connectors
Mounting Bracket
Module Number Switch (SW-1)
This
g
raphic displa
y
s an ei
g
ht channel board.