Filter
Top Products
are installing.
8. If the power to the chassis was turned OFF in step 1,
turn the power to the chassis ON.
Connecting External Cables
Connect an Ethernet cable to the Ethernet Interface
Connector on the Rear I/O module.
100BASE-TX Ethernet Connector Pinouts
NOTE: Connectors for Trunks 1 to 4 (J1 to J4 or the BNC
connectors on the Rear I/O module) are not functional in
this board.
Removing the Board
Exercise caution when removing the board from a cPCI
chassis. The board extractors are equipped with red locking
tabs that lock when the board is correctly positioned in the
chassis.
CAUTION
When removing the board, if the red locking tabs on the
extractors are not pressed while applying pressure to the
extractors, there is a risk of breaking the tabs.
To remove the board from the chassis, simultaneously press
down both red locking tabs (see the figure below) on the
extractors before applying pressure away from the center of
the board to release the board from the chassis.
Press and hold down
the red locking tabs on
both board extractors
before applying
pressure to the board
extractors
Removing the
Rear I/O Module
NOTE: In a live insertion (powered-on) system, do not
remove and replace a Rear I/O module while the main
(front) board is in service. Remove the front board first,
then remove and replace the Rear I/O module, and then
reinsert the front board. Remove the Rear I/O module using
the red locking tabs as described above.
After Installing the
Hardware
After installing the hardware, proceed with the software
installation as described in the instructions included with
the Dialogic
®
System Software.
For technical specifications and product information go to:
http://www.dialogic.com/products.htm.
Warranty and Return
Information
Warranty Period
For specific warranty information for this board, refer to the
Warranty section of the Products page, located at this URL:
http://www.dialogic.com/warranties/.
Contacting Technical Support
Dialogic provides technical support for its products through
a network of value added distributors who are trained to
answer technical questions on installing and configuring
Dialogic
®
products. If you are unsure how
to contact your support channel, please call Dialogic
in the United States at 973-967-6600 (9am-5pm EST)
and we will assist in obtaining the appropriate support
channel. Outside the United States please refer to
http://www.dialogic.com/support/contact to obtain
local contact information.
Dialogic also provides direct support via Dialogic
®
Pro™
Services agreements. For more details of direct support
from Dialogic please refer to:
http://www.dialogic.com/support/DialogicPro.
Returning a Product
To return a board for warranty repair or any other returns,
please refer to: http://www.dialogic.com/support/hwfaults
Sales Assistance
If you have a sales question, please contact your
local Sales Representative or the Regional Sales Office
for your area. Address, telephone and fax numbers, are
available at the Dialogic website located at:
http://www.dialogic.com/contact.htm.
To purchase Dialogic
®
products, please refer to the
following website to locate the appropriate supplier.
http://www.dialogic.com/purchase.htm.
All contents of this document are furnished for informational use only and
are subject to change without notice and do not represent a commitment on
the part of Dialogic Corporation or its subsidiaries (“Dialogic”). Reasonable
effort is made to ensure the accuracy of the information contained in the
document. However, Dialogic does not warrant the accuracy of this
information and cannot accept responsibility for errors, inaccuracies or
omissions that may be contained in this document.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION
WITH DIALOGIC
®
PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,
BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS
PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND
DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER,
AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC
PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY,
OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF
A THIRD PARTY.
Pin 1
Dialogic products are not intended for use in medical, life saving, life
sustaining, critical control or safety systems, or in nuclear facility
applications.
It is possible that the use or implementation of any one of the concepts,
applications, or ideas described in this document, in marketing collateral
produced by or on web pages maintained by Dialogic may infringe one or
more patents or other intellectual property rights owned by third parties.
Dialogic does not provide any intellectual property licenses with the sale of
Dialogic products other than a license to use such product in accordance with
intellectual property owned or validly licensed by Dialogic and no such
licenses are provided except pursuant to a signed agreement with Dialogic.
More detailed information about such intellectual property is available from
Dialogic’s legal department at 9800 Cavendish Blvd., 5
th
Floor, Montreal,
Quebec, Canada H4M 2V9. Dialogic encourages all users of its products
to procure all necessary intellectual property licenses required to
implement any concepts or applications and does not condone or
encourage any intellectual property infringement and disclaims any
responsibility related thereto. These intellectual property licenses may
differ from country to country and it is the responsibility of those who
develop the concepts or applications to be aware of and comply with
different national license requirements.
Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and
SIPcontrol, among others, are either registered trademarks or trademarks of
Dialogic. Dialogic's trademarks may be used publicly only with permission
from Dialogic. Such permission may only be granted by Dialogic’s legal
department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada
H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to
full respect of the trademark guidelines published by Dialogic from time to
time and any use of Dialogic’s trademarks requires proper
acknowledgement. The names of actual companies and products mentioned
herein are the trademarks of their respective owners.
Link
Status
Indicator
(G reen)
Pin
1
2
3
4
5
6
7
8
Label
RD+
RD-
TD+
NC
NC
TD-
NC
NC