Filter
Top Products
Digi One EM Hardware Reference 11
Reset Switch
The reset switch, located between P3 and CR1, does the
following (depending on how long you hold the switch down):
• It reboots the Digi One EM if you press and release the
switch immediately.
• It reboots the Digi One EM and restores the configuration
to factory defaults. (Press and hold the switch down for
about 20 seconds while powering the Digi One EM up.)
LEDs
Digi One EM LEDs provide information on port activity,
diagnostics, and Ethernet activity.
LED Color Function Interpretation
Top left Green
Indicates serial
port activity
• Off means that the serial
channel is idle.
• Blinking indicates an
active connection.
Top
right
Green
Network link sta-
tus
• Off means that no link
has been detected.
• On means that a link
has been detected.