Filter
Top Products
Digi m10 Technical Overview
Digi International, Inc. © 2009
Page 20 of 26
4.3 Temperature Query Response
The Temperature Query Response packet (see Table 4) is sent from the Digi m10 to the host
controller, indicating the satellite modem’s temperature in degrees Celsius.
Table 4: Temperature Query Response Packet
0
0x05/0x06
Packet Header
1
0x1A
Packet Type
2
Length0
Length of the packet
3
Length1
4
Retry_count/ Pkt Sequence Number
5
Temp0
Temperature value in
little endian
format.(This is a 32
bit floating point
number)
6
Temp1
7
Temp2
8
Temp3
9
Fletch0
Fletcher Checksum
10
Fletch1
NOTE: This packet is sent from the Digi m10 to DTE and it contains the current
temperature of the Digi m10 in degrees Celsius.