Directed Video VDC301 Power Supply User Manual


 
© 2006 Directed Electronics - all rights reserved
2255
a) Position the Inverter as far as possible from the television, the
antenna and the antenna cables.
b) Adjust the orientation of the Inverter, the antenna cables, and
the TV power cord to minimize interference.
c) Make sure that the antenna feeding the television provides an
adequate ("snow free") signal and that high quality, shielded antenna
cable is used.
TTrroouubblleesshhoooottiinngg GGuuiiddee
PPRROOBBLLEEMM:: LLAACCKK OOFF PPOOWWEERR OOUUTTPPUUTT
Possible causes
Inverter not adequately warmed up
Automotive system requires ignition to be on
Battery voltage below 9.5 volts
Equipment being operated draws too much power
Inverter in thermal shutdown condition