Filter
Top Products
4
Introduction
A DishPro 21 (DP21) Multi-Dish Switch allows you to receive signals
from two DishPro LNBFs, and route these signals to a DishPro satellite
receiver (see page 10 for wiring diagrams).
This guide explains how to install a DP21 Multi-Dish Switch. Use this
guide along with the DishPro Installation Instructions that are in the user
guide that came with your receiver.
The DP21 switch can be used only with DishPro LNBFs,
DishPro Receivers, and non-DishPro receivers equipped
with the DishPro Adapter. DishPro products can be
identified by the DishPro logo shown below.
Instructions_Small.fm Page 4 Tuesday,January14, 2003 2:08 PM