Filter
Top Products
10/100 PCI Fast Ethernet Card
3
2
Installation
Minimum Hardware Requirements
•
Intel Pentium-class processor
•
mouse or compatible pointing device
•
CD-ROM drive
•
VGA video adapter
•
32 MB RAM
•
2 MB HDD space
Operating System Requirements
•
Microsoft Windows NT 4.0 (with Service Pack 6, Service Pack 5, with Service Pack 3 and NDIS Hot Fix, and
with Service Pack 4 and Roll-up Hot Fix)
•
Microsoft Windows 2000
Installation of a Server Card requires hardware installation first, then software installation. The Server Card
requires a universal bus PCI connection and enough room behind the connector to accommodate a full-length
card.
Unpacking and Inspection
CAUTION
:
Under ordinary circumstances, the Server Card will not be affected by static charge as may be received through
your body during handling of the unit. In special circumstances where you may carry an extraordinarily high
static charge, it is good practice to reduce the charge by touching a ground before handling the adapter card.
Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you
have:
•
One Ethernet Adapter Server Card.
•
Server Card Software CD-ROM
Installing the Adapter
1.
Shut down the computer, unplug its power cord, and remove the chassis cover.
2.
Insert the contact edge of the Server Card into the connector of any available PCI Bus Master expansion
slot. Press the card firmly into the connector and ascertain that the card’s contacts are fully seated in the
connector.
3.
Install the bracket screw that secures the card to the computer chassis.
4.
Replace the computer’s chassis cover.
5.
Connect all the cable in your group.