Filter
Top Products
-14-
Configuring the Ethernet Broadband Router
The DI-704P provides Web based configuration. You can configure your DI-704P
through your Netscape Communicator or Internet Explorer browser in MS
Windows, Macintosh or UNIX based platforms.
Start-up and Log in
Activate your browser, and disable the proxy or add the IP address of the
DI-704P into the exceptions . Then, type the IP address of the DI-704P into the
Location (for Netscape) or Address (for IE) field and press “Enter.” For example:
http://192.168.0.1.
After the connection is established, you will see the web user interface. There
are two appearances of web user interface: for general users and for the system
administrator.
To log in as an administrator, enter the system password (the factory setting