Filter
Top Products
DSA-3200 Wireless Service Gateway User Manual
88
6 Appendix - Windows TCP/IP Setup
If you have not changed the factory default settings of the DSA-3200 or Windows
2000/XP TCP/IP Configuration, it is not necessary to make any modification here.
With the factory default settings, the DSA-3200 will automatically assign an
appropriate IP address (and related information) to each PC after the PC has been
booted.
6.1 Setting up a PC to connect to the DSA-3200
After the DSA-3200 is installed, the following must be set up for the PC within the
Public LAN and Private LAN sections:
y TCP/IP Network Setup
y Internet Connection Setup
6.1.1 TCP/IP Network Setup
y If the operating system of your PC is Windows 2000/XP, then you just need to
keep the default setting (without any change) to directly start/restart the system.
y During the process of starting the system, the DSA-3200 with DHCP function will
automatically assign an appropriate IP address (and related information) for each
PC.
y For the Windows based systems other than those for servers, the default setting
of the TCP/IP will be a DHCP client, and the setting is “obtain an IP address
automatically”.
y If you want to use the static IP in the Public LAN or Private LAN section or to
check the TCP/IP setup, please refer to section 6.2 for more information.