Filter
Top Products
25
Using the Configuration Utility (continued)
Status > Indication
Indicates the
current tempera-
ture.
Temperature
Indication-
Indicates the
RSSI voltage.
Available only in
PtP Bridge, AP
Repeater, and
AP Client
modes.
RSSI (Receiving
Signal Strength
Indication) -
Status > Client Info
Note: The following two screens contain information about the device that is
communicating with the DWL-2700AP. This information is available only
when the DWL-2700AP is in point-to-point, client or repeater mode.
The MAC address
of the device com-
municating with
the DWL-2700AP.
MAC -
The device is set
to the 802.11g
band.
Band -
The device is set
to Open System.
Authentication -
The device is set
to Open System.
RSSI -
Power Saving
Mode -
In this case, the communicating device is set to Power Save Off.