Filter
Top Products
9
Whenever you want to configure your network or the DWL-700AP, you can access the
Configuration Utility by opening the web-browser and typing in the IP address of the
DWL-700AP. The DWL-700AP’s default IP address is shown below:
Open the web browser
Type in the IP address
of the access point
(The IP address shown in the example above is the default setting. Use this IP address
when connecting to a network consisting of other D-Link devices set to their default
settings. If you have changed the IP address of the DWL-700AP to conform to a net-
work other than one with D-Link devices, then input that IP address in the web browser,
instead of the default IP address shown.)
Type admin in the
User name field
Leave the Password
blank
Click OK
!
admin
!
!
!
!
Using the Configuration Utility
If you wish to change the default settings or optimize the performance of the
DWL-700AP, D-Link has included a configuration utility for this purpose.