Filter
Top Products
13
SSID: Service Set Identifier is a name that identifies a wireless network. Access points
and wireless devices attempting to connect to a specific WLAN (Wireless Local Area
Network) must use the same SSID.The default setting is default.
Wireless Mode: Click on the pull-down menu; select from the following options:
Infrastructure - Connecting to the WLAN using an access point. (This is the
default setting.)
Ad-Hoc - Wireless mode used when connecting directly to a computer equipped
with a wireless adapter in a Peer-to-Peer environment.
Channel: The channel selection is automatically determined by the DWL-G630. In Ad-
Hoc mode, the channel must be manually set to the same channel for each wireless
adapter.
Tx Rate: Tx rates are automatically determined for an optimal speed up to 54Mbps.
Continuous Access Mode - This default setting consumes the most power.
Maximum Power Save - This setting consumes the least power.
Power Save - This setting consumes a moderate amount of power.
Configuration Utility (continued)
D-Link AirPlus DWL-650+ 2.4GHz Wireless Cardbus Adapter
Configuration
Click Apply to save the changes.
Power Mode: Select from three modes:
Preamble: Select Long or Short preamble. The Preamble defines the length of the CRC
block (Cyclic Redundancy Check is a common technique for detecting data transmission
errors) for communication between the access point and the wireless network adapters.
High network traffic areas should use the shorter preamble type.