Filter
Top Products
26D-Link DAP-2553 User Manual
Section 3 - Configuration
Static IP (Manual) is chosen here. Choose this option
if you do not have a DHCP server in your network,
or if you wish to assign a static IP address to the
DAP-2553. When Dynamic IP (DHCP) is selected,
the other elds here will be grayed out. Please allow
about 2 minutes for the DHCP client to be functional
once this selection is made.
The default IP address is 192.168.0.50. Assign a
static IP address that is within the IP address range
of your network.
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within
the range of your network.
LAN
Get IP From:
IP Address:
Subnet
Mask:
Default
Gateway:
LAN is short for Local Area Network. This is considered
your internal network. These are the IP settings of the
LAN interface for the DAP-2553. These settings may
be referred to as private settings. You may change
the LAN IP address if needed. The LAN IP address is
private to your internal network and cannot be seen
on the Internet.