Filter
Top Products
-14-
Troubleshooting
Tips to Configure Your PDA for accessing the Internet
To Configure the following: Go to:
The Access Point’s ESSID Settings>System>Wireless LAN
Setting>Configuration
WEP keys (if required) Settings>System>Wireless LAN Settings>WEP
DHCP/Fixed IP (under IE
browser)
Setting>Connections>Network (select the Wireless
LAN CF Card. Set the IP Address and Name
Servers accordingly.)
IP Addresses for device, Proxy
server (under IE browser)
Tools>Options>Connections (enter desired Proxy’s
IP address and port#.)
If DNS, WINS is needed (most
IP addresses are automatically
assigned.)
(Under IE browser) Tools>Internet
Options>Connections (enter desired Proxy address
and port #.)
After you shut down your PDA, when you “power on” the PDA again, it will open
to the last application in use when it was “shut down.” If you are unable to navigate
out of the “utility” program, you may use the PDA’s reset button to terminate the
program. You can activate it again when needed.
If your wireless connection to the Access Point gets disconnected for any reason,
you can reset and force a connection request by going to the utility program,
selecting "Configure," checking parameters, then selecting "Modify" to force a
re-scan.
If your device roams to a new Access Point which is in a different subnet, you
may need to do one or both of the following: (1) Unplug and re-insert the Wireless
LAN Compact Flash Adapter, or (2) Hard reset your device to force a "release and
renew" of a re-assignment of the IP address in a DHCP Access Point environment.