D-Link DES-1008D Switch User Manual


 
2 3
A. Power:
Power is supplied through an external DC power adapter. Since the switch does not
include a power switch, plugging its power adapter into a power outlet will immediately
power it on.
B. Fast Ethernet Ports:
These ports support network speeds of either 10 Mbps or 100 Mbps, and can operate
in half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX
crossover detection, which gives the Switch true, “plug and play” capabilities. Just
connect any network cable between the Switch and the device, and The Switch will
automatically detect the settings of the device and adjust itself accordingly.
LED Indicators
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the switch, connection or attached devices.
A. System Power:
This indicator lights green when the Switch is receiving power, otherwise, it is off.
B. Link / Act:
The “100 LINK/ACT,10 LINK/ACT” LED indicator lights green for hookup to 100 Mbps
speed or light amber for hookup to 10 Mbps speed.
DES-1005D DES-1008D
Technical Support
D-Link UK & Ireland Technical Support over the Telephone:
08456 12 0003 (United Kingdom)
BT 3ppm peak, 1.5ppm off peak, 0.5ppm weekends. (UK Pence per mintue). Other carriers could be
lower. Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm
+1890 886 899 (Ireland)
€0.05ppm peak, €0.045ppm off peak Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm
D-Link UK & Ireland Technical Support over the Internet:
http://www.dlink.co.uk
ftp://ftp.dlink.co.uk