Filter
Top Products
9
proper grounding facilities.
‧A
screwdriver (not included in the accessory kit)
The following steps let you connect the switch to a protective
ground:
Step 1: Verify if the system power is off.
Step 2: Use the ground cable to place the #8 terminal lug ring on top
of the ground-screw opening, as seen in the figure below.
Step 3: Insert the ground screw into the ground-screw opening.
Step 4: Using a screwdriver, tighten the ground screw to secure the
ground cable to the switch.
Step 5: Attach the terminal lug ring at the other end of the grounding
cable to an appropriate grounding stud or bolt on rack where
the switch is installed.
Step 6: Verify if the connections at the ground connector on the
switch and the rack are securely attached.