Filter
Top Products
35D-Link DIR-615 User Manual
Section 3 - Configuration
Enter a new login name and a new password for the
administrator login. Only the administrator can make changes
to the settings.
Enter a new login name and a new password for the user
login. If you login as user, you will only be able to see the
settings and not be able to make changes.
Remote management allows the DIR-615 to be configured
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks.
This feature enables you to perform Administrator tasks from
the remote (Internet) host.
Enter the IP address of the remote computer. You may enter
* to allow a connection from any internet address.
The port number used to access the DIR-615.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet
IP address of the DIR-615 and 8080 is the port used for the
Web Management interface.
Admin Password:
User Password:
Remote
Management:
Remote Admin IP:
Port:
Administrator Settings
This page will allow you to change the Administrator and User names and passwords. You can also enable Remote
Management. There are two accounts that can access the management interface through the web browser. The
accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the
settings but cannot make any changes. Only the admin account has the ability to change both admin and user account
passwords.