Filter
Top Products
Unpacking and Installation
♦ One Multi-language Quick Installation Guide
If any item is missing, or if you find any damage or mismatch,
promptly contact your dealer for assistance.
Installing the DP-300+
WARNING: Configuration problems may result if the DP-
300+ is powered up without first establishing
its network connection. Follow this procedure
to avoid complications at the configuration
stage.
1. Confirm proper operation of each of the printers to be
connected to the DP-300+. If you test your printers by
printing test files directly from a PC, then make each
printer’s test connection to the PC through the same port
(serial or parallel) as the one you plan to use in
connecting to the DP-300+.
2. When you have confirmed proper operation of each
printer, switch its power off.
3. Confirm that your network is operating normally.
4. Connect the DP-300+ to the network, using the RJ-45
(10Base-T/100Base-TX) connector on the print server’s
side panel.