Filter
Top Products
Unified Services Router User Manual
39
can then be associated with a traffic selector, so that bandwidth profile can be applied
to the traffic matching the selectors. Selectors are elements like IP addresses or
services that would trigger the configured bandwidth regulation.
Figure 19: List of Configured Bandwidth Profiles
To create a new bandwidth profile, click Add in the List of Bandwidth Profiles. The
following configuration parameters are used to define a bandwidth profile:
Profile Name: This identifier is used to associate the configured profile to the
traffic selector
You can choose to limit the bandwidth either using priority or rate.
If using priority ―Low‖, ―High‖, and ―Medium‖ can be selected. If there
is a low priority profile associated with traffic selector A and a high
priority profile associated with traffic selector B, then the WAN
bandwidth allocation preference will be to traffic selector B packets.
For finer control, the Rate profile type can be used. With this option the
minimum and maximum bandwidth allowed by this profile can be limited.
Choose the WAN interface that the profile should be associated with.