Filter
Top Products
19
Network Settings (LAN)
LAN interface mode※
Router: The system serves as a router with NAT.
Bridge: The system serves as a bridge between WAN port and LAN port without NAT. (LAN
default gateway will still be accessible for configuration).
LAN IP/Subnet mask
Gateway LAN Port IP address and the subnet mask value.
Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port must
be used. WAN Port cannot make this setting. Always use port 80 when connecting to
LAN port. 0 is to disable http port for WAN.
Enable Web UI: It disables any access from WAN and LAN if ticked.
Enable Telnet Service: It allows user to make settings from Telnet.