Filter
Top Products
44
Troubleshooting (continued)
4. What variables may cause my wireless products to lose recep-
tion?
D-Link products let you access your network from virtually anywhere you want. However,
the positioning of the products within your environment will affect the wireless range.
Please refer to Installation Considerations in the Wireless Basics section of this manual
for further information about the most advantageous placement of your D-Link wireless
products
.
5. Why does my wireless connection keep dropping?
Antenna orientation- Try different antenna orientations for the DWL-7100AP.
Try to keep the antenna at least 6 inches away from the wall or other objects.
If you are using 2.4GHz cordless phones, X-10 equipment or other home secu-
rity systems, ceiling fans, and lights, your wireless connection will degrade dra-
matically or drop altogether. Try changing the channel on your access point and
wireless adapter to a different channel to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that generate
RF noise, like microwaves, monitors, electric motors, etc.
6. Why can’t I get a wireless connection?
To establish a wireless connection, while enabling Encryption on the DWL-7100AP, you
must also enable encryption on the wireless client.
For 802.11a, the Encryption settings are: 64-, 128- or 152-bit. Make sure that the
encryption bit level is the same on the access point and the wireless client.
For 802.11b, the Encryption settings are: 64-, 128-, or 256-bit. Make sure that
the encryption bit level is the same on the access point and the wireless client.
Make sure that the SSID on the access point and the wireless client are exactly the
same. If they are not, wireless connection will not be established. Please note that there
are two separate SSIDs for 802.11a and 802.11b. The default SSID for both 802.11a and
802.11b is default.