Filter
Top Products
42D-Link GO-RT-N300 User Manual
Section 3 - Conguration
The Virtual Server page allows you to open a single port. If you would like to open a range of ports, refer to the next page.
Select an application from the drop-down menu or
type a name in the next field.
Enter a service name.
Select TCP or UDP from the Protocol drop-down menu.
Enter the WAN port number.
Enter the LAN Open port number.
Enter the IP address of the computer on your local
network that you want to allow the incoming service to.
Usual Service
Name:
User-defined
Service Name:
Protocol:
WAN Port:
LAN Open Port:
LAN IP Address:
Click the Apply Changes button to save any changes made. The virtual server will then be added to the Current Virtual Server
Forwarding Table below. To delete or disable a virtual server, click the Delete or Disable buttons in the Action field of the
virtual server in the table.
GO-RT-N300