Filter
Top Products
7 D-Link KVM-410 Quick Install Guide
Logging In
The KVM-410 can be managed and configured with an Internet
browser. To configure the KVM-410 using an Internet browser, you
must first log into the device by browsing to it’s IP Address.
When first powered on, the KVM-410, by default is set to obtain an
IP Address through DHCP. If it does not obtain an IP Address after
30 seconds, the KVM-410 automatically sets a static IP address of
192.168.0.60:
Note: Your IP Address may be different from the example shown
here. See the manual included on the product CD for other methods
of determining the IP Address of the KVM-410.
Open a web
browser and in the
address bar, enter
the IP Address of
the KVM-410.
A Security Alert dialog box will appear. Click Yes
to accept the certificate to be redirected to the login
screen.