Filter
Top Products
X•treme Per formance
SCSI Features
SCSI Interface Ultra2 SCSI-3
Maximum SCSI Transfer Rate 80MB/s
SCSI Bus 16-bit with multi-mode SE/LVD termination
Number of SCSI Busses 1 (upgradable to 3)
Maximum Number SCSI Devices 15 (upgradable to 45)
External SCSI Connector 68-pin Very High Density Cable Interconnect (VHDCI)
Internal SCSI Connector 68-pin High Density
PCI Features
Host Interface 32-bit PCI 2.1
Maximum PCI Transfer Rate 132MB/s
Operating Environments
• Microsoft® Windows® NT® 4.0, SCO® 3.2.4.2, SCO OpenServer 5, NetWare® 4.11,
UnixWare® 2.1.4.2, SCO UnixWare 7, OS/2®, Win 95/98
• I
2
O compliant
• Compatible with I
2
O block storage or SCSI OSMs provided with Windows NT, SCO, NetWare
Power Requirements
Voltage 5V +/- 5%
Ripple and Noise 50mV peak-to-peak max
Current 2.0A typical
Reliability
MTBF > 400,000 Hours
Environmental Specifications (operating)
Ambient Temperature 0° to 50° C
Relative Humidity 10% to 90% non-condensing
Altitude 3,000 meters (10,000 feet)
Agency Certifications
FCC, CE, UL, CSA, AUSTEL, SMA
Complete Kit Contents
• PM2654U2-R Ultra2 SCSI RAID Controller
• Ultra2 Wide internal SCSI cable with multi-mode terminator, supports 4 SCSI devices
• Storage Management software
• I
2
O device drivers
• User’s Manual and Quick Install Guide
PM2654U2-R Technical Specifications
MM-0491-1298
Expansion Modules
SX4054U2 SCSI Expansion Modules
add one (SX4054U2-1) or two (SX4054U2-2)
additional Ultra2 SCSI
channels to any SmartRAID V
SCSI controller, supporting
up to 45 SCSI devices from a
single PCI slot. Supports
Fast and Ultra SCSI devices
as well.
SX4055F Fibre Expansion Module
adds one Fibre Channel
Arbitrated Loop port to
any SmartRAID V SCSI or
Fibre Channel controller,
controlling up to 126
Fibre Channel devices.
SM4050 ECC EDO SIMMs provides 16MB
(SM4050-16) or 64MB (SM4050-64) of high-speed
disk cache for SmartRAID V controllers, plus DPT’s
exclusive SmartCorrect™ ECC technology
which detects and corrects up to
32-bit data errors. (SmartRAID V
controllers also accept industry
standard EDO 4MB, 16MB or
64MB SIMMs.)
Management Utilities
Storage Manager™ is a window into your storage
system. This user-friendly, self-installing, GUI-based
utility provides:
• Easy, point-and-click creation, deletion and
maintenance of disk arrays
• Array diagnostics
• Event logging and notification
• I/O load monitoring
• Device identification, status, and inventory
• Supports Windows® 95/98, NT®, NetWare®,
SCO® Unix®, UnixWare® and others
• Remote management of NT, NetWare, SCO
Unix, UnixWare and other servers via TCP/IP or
modem connection
• Online help
SMOR (Storage Manager On ROM) is a BIOS-based
set-up utility that allows you to quickly configure
SmartRAID controllers and attached devices
without having to boot an operating system.
Features include:
• Device identification, status, and inventory
• Configure controller hardware options
• Low-level formatting hard drives
• Create and delete disk arrays
• View and modify RAID configurations
© 1998 Distributed Processing Technology Corporation. All rights reserved. Distributed Processing Technology, the DPT logo and
SmartRAID are registered trademarks of Distributed Processing Technology Corporation. Storage Manager and SmartCorrect are
trademarks of Distributed Processing Technology Corporation. All other trademarks are property of their respective owners.
DPT Corporate Headquarters
140 Candace Drive, Maitland, FL 32751 USA
Tel 407/830-5522 FAX 407/260-5366
Sales FAX 407/260-6690 BBS 407/831-6432
Internet: www.dpt.com
Northern Europe
Milton Keynes, United Kingdom
Tel 44(0)1908-233951
FAX 44(0)1908-230837
Southern Europe
Munich, Germany
Tel 49 (0) 89 92 404 160
FAX 49 (0) 89 92 404 200
DPT Japan (JTI)
Tokyo, Japan
Tel (81) 3-5951-4302
FAX (81) 3-5951-4304
Poland
Poznan-Kozieglowy
Tel 48 (0) 602-258303
FAX 48 (0) 61-8520707
DPT Australia
Watson (Canberra)
Tel (011) 61-412-004830
FAX (011) 61-624-89732