Filter
Top Products
Caster Leg
Bolt Washer Washer Nut
Screen Leg Plastic Cap
1. Remove screen and caster box from carton.
2. Remove nuts and bolts and casters from box.
3. Place screen on it’s side.
4. Slide a plastic cap over the leg.
5. Unscrew nuts from bolts and position one of
the washers on the bolt.
6. Align one of the casters with the holes in the
leg of the screen.
7. Insert bolt through the holes of the caster and
screen leg. Be sure to position a washer in
between the bolt head and the caster leg.
8. Place another caster leg over the end of the
bolt that is protruding form the hole.
9. Place a washer over the end of the bolt.
10. Place a nut over the end of the bolt and use the
provided allen wrench to tighten the bolt.
11. Repeat for other screen leg.
12. Make sure all bolts are firmly tightened.
13. Slide plastic cap down to cover top of caster
legs.
assembly instructions