Filter
Top Products
3
Fastening the lens cover
To avoid losing the lens cover, please fasten it the lens cap to the projector using
the strap.
1.
Fix the strap to the strap ring of the lens cover.
2.
Put the strap into the groove on the rivet.
3.
Push the rivet into the strap hole.
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NTSC/PAL/
SECAM video signals onto a screen. It requires a small space for installation
and produces a large image from a short distance.
High Brightness
Newly developed 230W UHB (Ultra High Brightness) lamp gives you a
bright image on a screen. The image is bright enough for use in lighted
rooms.
Low Noise
WHISPER mode is available for quieter operation. It is perfect for
use in low luminance rooms where low noise is more
important than brightness.
Compact Body
Even with its many features, this projector is extremely compact and slim.
Preparations
NOTE
• Keep the original packing materials for future reshipment. For
moving the projector, be sure to use the original packing materials. Use special
caution for the lens part.
Strap ring
Strap ring
Strap
Strap
Strap hole
Strap hole
Bottom side