Filter
Top Products
4
1. Connection to the network
1.1 System requirements
1. Connection to the network
The following equipments are required to connect the projector to your computer
through the network.
■ Common The projector: 1 unit, Computer : minimum 1 set
■ Depending on how you want to connect
LAN cable (CAT-5 or greater): 1 piece *1
1.1.1 Required equipment preparation
*1: The system for using the network function of the projector requires
communication environment conforming 100Base-TX or 10Base-T.
• The network communication control is disabled while the projector is
in standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (&SETUP menu in the Operating Guide)
NOTE
To connect your computer to the projector and use the network function of the
projector, your computer needs to meet the following requirements.
1.1.2 Hardware and software requirement for computer
ü OS: One of the following.
Windows
®
XP Home Edition /Professional Edition
Windows Vista
®
Home Basic /Home Premium /Business /Ultimate /Enterprise
(Service Pack 1 or later)
Windows
®
7 Starter /Home Basic /Home Premium /Professional /Ultimate /
Enterprise
Windows
®
8
Windows
®
8 Pro/Enterprise
ü CPU: Pentium 4 (2.8 GHz or higher)
ü Graphic card: 16 bit, XGA or higher
ü Memory: 512 MB or higher
ü Hard disk space: 100 MB or higher
ü Web browser: Internet Explorer
®
6.0 or higher