Filter
Top Products
Durst Phototechnik
AG
Large Format Division
Vittorio-Veneto-Straße 59
I-39042 Brixen, Italy
Telefon +39 04 72 81 01 11
Telefax +39 04 72 83 09 80
www.durst-online.com
info@durst.it
Durst Phototechnik
Digital Technology
GmbH
Julius-Durst-Straße 11
A-9900 Lienz, Austria
Telefon +43 48 52 7 17 77
Telefax +43 48 52 7 17 77 50
www.durst-online.com
info@durst-online.at
Technical Data
The latest technical developments
are constantly being incorporated
into Durst products. Illustrations and
descriptions are therefore subject to
modification. All rights reserved on
images and illustrations.
©
Durst Phototechnik AG, 09/2008
IX25055
Printing specifications
Media types:
3M High Intensity Prismatic
Sheeting HIP 3930
3M Diamond Grade Cubed
Sheeting DG3 4090
3M Engineer Grade 3290I Sheeting
Maximum printing width:
Up to 1575 mm (62 in.) with border
and no edge to edge option.
Max media weight:
Limited only by maximum outer
diameter of supply roll and/or max.
weight.
• Lower position 1: approx. 35 cm
up to 200 kg (445 lb.) with
pneumatic axle for media feeding
and take-up unit Pneu 76, 74 to
82 mm (2.9 to 3.2 in.)
• Upper position:
approx. 25 cm (9.8 in.) up to
35 kg (77 lb.)
Max. medium thickness:
0.15 mm up to 2.5 mm
Medium cutoff:
Approx. 40 cm (16 in.) at the
leading edge
Media cutting:
Mechanical guide for manual
cutting of the roll
General specifications
Power supply:
120/208 VAC ± 10 %, 3 phase,
3 wi, 60 Hz, or
230/400 VAC ± 10 %, 3 phase
+ N/50 Hz
Power consumption:
Maximum: 13 KVA; average: 7 KVA
Max. amperage per phase:
208 VAC: 32 amp
230/400 VAC: 17 amp
Dimensions:
Width: approx. 505 cm (199 in.)
Length: approx. 201 cm (79 in.)
Height: approx. 212 cm (83 in.)
Space requirement:
Approx. 7 x 5 m ( 23 x 16 ft.)
Weight:
approx. 2000 kg (4400 lb)
Safety standards:
Complies with currently valid
guidelines
Printing specifications
Printing system:
Patented Durst Roll to Roll trans-
port system with Quadro® Array-
Technology
Resolution:
400/600 dpi (adressable)
800/1200 dpi (apparent)
Finish:
3M 1170 overlay lm
Colors:
Rho 161 TS: CRYK
Inks:
3M UV 8800 Inks,
designed to match the traffic sign
colors
Ink supply:
Continuous ink supply with 10-litre
ink reservoirs, refillable during
operation for large print processes.
Rell ink in 5-litre
non-returnable containers, easy
disposal in collapsed condition,
avoiding pollution to the machine
and the environment.
S o f t w a r e / R I P :
Durst Rho User software based on
Linux.
RIP Workstation with Caldera
GrandRIP+
Productivity:
Rho 161 TS-16:
Up to: 65 m
2
/h (700 sq.ft./h) in
2 Pass Mode at 400 dpi
Front-end workstation:
HP Linux Worstation
Operating system:
Pre-installed RedHat Enterprise
Linux WS EM64T
Monitor:
HP TFT Monitor
Network Interface:
Ethernet 100/1000 Mbit
Location requirements
Maximum height:
2,400 m (8,000 ft) above sea level
Temperature range:
+15 °C to +30 °C (+59°F to 86°F),
non-condensing
Relative air humidity:
25 - 80 %, non-condensing