Filter
Top Products
3
REMOTE CONTROL OPERATION
AUTOMATIC SOURCE SELECTION
The VS4 HDMI switch can automatically detect when an input device is powered-
on or powered-off. Using this information, the VS4 will automatically select the first
input device which is powered-on. To make use of this feature, keep at most one
input device powered-on at any given time. This will allow the VS4 to automati-
cally select the appropriate input device.
The VS4 comes with two remote controls. The “Simple” remote can be used to
turn the VS4 unit on or off as well as select between the input sources.
The “Professional” remote control enables discrete command functions
of the product.
Professional IR
remote control
unit with discrete
commands
Simple IR
remote control
unit
The discrete IR commands available on the Professional remote control unit are:
- Power On/Off toggle
- Input 1, 2, 3, or 4 direct select
- Input Select Up
- Input Select Down
- Auto Input Select
- Discrete Power On
- Discrete Power Off
- Front Panel Display On
- Front Panel Display Off