Filter
Top Products
5
4. Loading Labels
Important!
In order for the labels to feed properly during printing, pay attention to the following when loading
labels on the spool and into the printer:
• The label spool guide must be pushed flush against the label roll, with no gap. See
Figure 6.
• The labels must be loaded with the left edge of the label inserted against the left edge of the
label feed slot. See Figure 8.
To load a label roll
1 Press the form-feed button to eject the labels that protected the
printer during shipment.
2 Open the top cover and remove any packing material inside the
label compartment.
3 Remove the label spool from inside the top cover and pull the spool
guide from the spindle.
4 Hold the spool spindle in your left hand and place the label roll on the
spindle so that the labels feed from underneath and the left edge of the label roll is firmly
against the side of the spool. See Figure 5.
Figure 5
Spool
guide
Spool
spindle