Dynalink RTA1025W Network Router User Manual


 
4 Ethernet Ports with 11g Wireless and Firewall
Technical Specifications (RTA1025W)
Regulatory Approval and Compliance
•ACA
Telecom New Zealand PTC270
Power Requirement and Operation
Environment Requirement
Power Adaptor: Output 12 VAC, 1A
Power Consumption: less than 10 W
Ambient Temperature: 0 to 40°C
Relative Humidity: 20% to 90% (non-condensing)
Physical
Front Panel: 9 LED Indicators
Back Panel
Dimensions: 190mm(L) x 130mm(W) x 40mm(H)
Weight: 350g
Hardware Interface
One RJ-11 port for ADSL connection
IEEE 802.11g and 802.11b Wireless LAN interface
Four Ethernet ports for IEEE 802.3/802.3u 10/100
Base-T auto-sensing, auto cross-over
One USB port compliant to USB v1.1
One hidden reset button for restoring factory
default settings
Chipset
Broadcom BCM6348 single-chip ADSL2+ with
integrated MIPS32 CPU, transceiver & Analog
Front End
Broadcom BCM4318 single-chip 802.11g wireless
LAN solution
Wireless LAN
Supports IEEE 802.11g and 802.11b
Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for
802.11g and 11, 5.5, 2, 1 Mbps for 802.11b
Diversity antenna system: one external antenna
and one internal antenna
Maximum RF output power: 15dBm for 802.11g
Coverage Area:
802.11g: LOS (Outdoors): Max. 50 meters;
Indoors: Max. 20 meters
802.11b: LOS (Outdoors): Max. 180 meters;
Indoors: Max. 60 meters
Support WEP (Wired Equivalent Privacy) RC4 with
64-bit or 128-bit key length
Support Access Control List, only registered WLAN
clients are allowed
Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed
WAP/WPA2. Support SSID stealthing
Support repeater function to extend coverage
Support client isolation for wireless hotspot
Support SSID stealthing
www.dynalink.co.nz www.dynalink.com.au