Filter
Top Products
ADSL Router User Manual
100
A new IP filtering setting for Outbound
traffic is created in the web page. To
edit the setting, please click
to get
into the editing page. To delete the
setting, click
to erase it. To set
another IP filtering, click Add again.
To add a new Inbound IP Filtering,
click Inbound traffic in the item of
Select the direction to filter packets
on the IP Filtering page. Use the
same way to add a new one as stated
above.
Quality of Service
QoS (Quality of Service) is an industry-wide initiative to provide preferential
treatment to certain subsets of data, enabling that data to traverse the Internet or
intranet with higher quality transmission service.
Quality of Service – Bridge QoS
To classify the upstream traffic by
assigning the transmission priority for
different users’ data, please use
Bridge QoS to prioritize the data
transmission.
The Bridge QoS allows you to set the
settings based on layer two bridge
packets.
Traffic Class Name:
Key in a name as the traffic class for
identification.
802.1p Priority:
Each incoming packet will be mapped
to a specific priority level, so that
these levels may be acted on
individually to deliver traffic
differentiation. Please choose the
number (from 0 to 7, low to high
priority) for the 802.1p Priority.
Traffic Priority:
There are three options – Low,
Medium, and High that you can
choose.
IP Precedence:
The number you choose here decides
the type of the IP address processed.
No change is the default setting.