Filter
Top Products
GBK62297 Issue 1, February 2003
About this Manual
This manual has been designed to help you install and configure a Dynamic DX Switchbox
(DX-ARC-SWB) module for a ‘generic’ brand powerchair. For this reason there are no
guidelines for specific applications, and this should be read in conjunction with the Installation
Manuals for all other DX Modules present in the system.
If there is a specific requirement for your application, please contact Dynamic Controls or one
of the sales and service agents, as we can assist you to configure the DX-ARC-SWB for this
application.
Throughout this manual there are a few symbols that will help you quickly identify the purpose
of the paragraph that follows:
Notes:
Notes provide supporting information for the previous paragraph or
section that should be followed in order to install, configure, and use the
DX-ARC-SWB safely and efficiently.
Warnings:
Warnings provide important information for the previous paragraph or
section that must be followed in order to install, configure, and use the
DX-ARC-SWB safely and efficiently.
The DX-ARC-SWB is not user serviceable. Specialized tools are necessary for the repair of
any DX-ARC-SWB component.
Do not install, maintain or operate this equipment without reading, understanding and
following this manual – including the Safety and Misuse Warnings – otherwise injury or
damage may result.
Due to continuous product improvement Dynamic reserves the right to update this manual.
This manual supersedes all previous issues, which must no longer be used.
Any attempt to gain access to or in any way abuse the electronic components and associated
assemblies that make up the powerchair system renders the manufacturer’s warranty void
and the manufacturer free from liability.
Dynamic and the Dynamic logo are trademarks of Dynamic Controls.
All other brand and product names, fonts, and company names and logos are trademarks or
registered trademarks of their respective companies.
Dynamic owns and will retain all trademark rights and Dynamic or its licensors own and will
retain all copyright, trade secret and other proprietary rights, in and to the documentation.
All materials contained within this manual, in hard-copy or electronic format, are protected by
copyright laws and other intellectual property laws.
© Copyright 2003 Dynamic Controls. All rights reserved.