Filter
Top Products
4
Setting up the USB card
To install the card:
1 Turn off your computer and unplug the power cord and all
cables.
2 Remove your computer’s case cover. See your computer’s
user guide for information about removing the cover.
3 Locate an available PCI slot. PCI slots are usually white.
4 Remove the screw that secures the backplate (the small
piece of metal that covers the opening for the PCI card on
the back panel of your computer), then remove the
backplate. You should store the backplate for future use.
5 Carefully insert the card into the PCI slot, seating it firmly
into the PCI slot. Do not touch the metal connector on the
card.
6 Secure the card to the case using the screw you removed
from the backplate.
7 Reinstall your computer’s case cover.
8 Plug in the power cord and other cables, then turn on your
computer.
DX-2P2C.fm Page 4 Friday, April 21, 2006 4:48 PM