Dynex DX-ESW5 Switch User Manual


 
2
Dynex DX-ESW5 and DX-ESW8 Ethernet Switches
Dynex DX-ESW5 and DX-ESW8 Ethernet
Switches
Français......................................................... 6
Español ....................................................... 10
10/100 Mb Fast Ethernet switch
Package contents
Your box should contain the following items:
One DX-ESW5 or DX-ESW8 switch
One AC power adapter
•This guide
•Wall mounting screws
If your box is missing any of the listed contents, contact Dynex for help at
(800) 305-2204.
Introduction
This switch is a low-cost, easy-to-use, high-performance, standard switch to
upgrade your old 10 Mbps network to a 100 Mbps network. It boosts your net-
work performance up to full duplex data transfer, and it can forward packets as
fast as the packets are delivered to the switch. Each port can be used as a general
port or as an uplink port for another switch, and will automatically switch its con-
figuration appropriately.
Features
Complies with IEEE 802.3 and IEEE 802.3u standards.
5 (DX-ESW5) or 8 (DX-ESW8) 10/100 Mbps auto-negotiating RJ-45 ports
supporting Auto MDI/MDIX.
Supports IEEE 802.3x flow control for full-duplex mode and backpressure
for half-duplex mode.
Supports MAC address auto-learning and auto-aging.
LED indicators for monitoring power, link, and activity.
•Plastic case.
•External ACpower adapter.
DX-ESW5-ESW8.fm Page 2 Friday, April 29, 2005 4:25 PM