Filter
Top Products
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh System
TEAC USB Hard Drive Installation Guide 5
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh
System
1. Turn off the power to your USB hard drive.
2. Turn on the power to your computer.
3. Insert the power cable plug into the DC IN input connector on the rear
panel of the USB hard drive (Figure 4 and Figure 5).
Figure 4. Connecting USB and Power Cables to External USB Hard Drive
4. Insert the power cable’s female connector into the AC power adapter
block (Figure 5 on page 6).
5. Plug the other end of the power cable into an AC outlet (Figure 5 on
page 6).
Note:
The following steps (1-8) apply to both IBM PC-compatible and
Macintosh systems.
USB 2.0 cable
power cable
USB 2.0 port
DC IN power input
plug
plug
Step 7
Step 3