Filter
Top Products
41
QL Series User Guide
Using the Accessories
Belt Clip
Refer to Figure 14. All QL se-
ries printers are equipped with a
belt clip as standard. To use:
hook the clip over your belt, and
ensure that the clip is securely
attached to the belt. The belt
clip will pivot to allow you to
move freely while wearing the
printer.
Kickstand
Refer to Figure 15 . The Kickstand option allows users to use
the printer on a desktop. To use the optional Kickstand: Flip
the Kickstand on the
back of the printer
open until you feel a
slight detent. The
printer will now sit at
approximately a 30º
to 45° angle on a
desktop depending
on the printer model.
continued
Clip printer
to belt
Printer can
pivot freely
Figure 15: The QL 420 Kickstand
Figure 14: The QL 420 Belt Clip