Filter
Top Products
9
5. Advance Smart-Function Setting
This smart switch provides advance features, which offers
you more flexibility in setting up your network. The following
section explains how to set up the VLAN, Trunking, Port
speed, Full/Half duplex modes and QoS.
Before using advance Configuration
Connect to PC
Attach a RS-232 serial cable 9-pin male connector to the
female connector on the switch. Plug the other side of this
cable to your PC.
Using Hyper Terminal to connect to Switch
In MS-Windows, launch “Hyper Terminal”, create a new
connection, and follow these steps:
1. Open the HyperTerminal application.
2. In Windows, select run from the start menu and choose the
application.
3. From the HyperTerminal menu, double click the icon then
on the next window, create a new name, such as Smart
Switch.