Filter
Top Products
14
5.2.1 Port Configuration
In this configuration, you can set the status of each port.
Enable: Press Space key to enable or disable this port.
“Yes” means the port is enable
“No” means the port is disable
Auto: You can enable or disable the auto-negotiation of each
port. Press Space key to choose items as follows:
AUTO: enable auto-negotiation.
NWAY_FORCE: force the port in specified
speed/duplex and enable auto-negotiation.
FORCE: disable auto-negotiation.
Spd/Dpx: You can set 10 or 100Mbps speed and full-duplex or
half-duplex mode on each port.
FlowControl:
♦ Full: Enable or disable the flow control function in
full-duplex mode.
♦ Half: Enable or disable the flow control function in
half-duplex mode.