Filter
Top Products
6
7. Mac 10.3.X/10.4.X/10.5.X
1. Insert the provided driver CD into your CD-ROM drive. Double-click
the CD and navigate to the directory of \Drivers\Mac\
2. Wait a while for the program to install the driver.
3. When the installation is done, click Finish.
4. Please enter your password as prompted.
5. Select Continue Installation to install the software and then
Reboot the Mac.
6. Connect the Ethernet adapter to a free USB port. Then a New port
Detected screen will prompted, and you will find that a new Ethernet
network interface is available.
Connecting to Your Network
Now the installation is complete. You can connect the adapter to your
network device such as hub, switch or router by an Ethernet cable. The
Link LED should light up to indicate a proper physical connection between
the adapter and the network.
This Quick Installation Guide describes only the basic instructions on
installation. For more information, please refer to the User’s Manual on the
provided CD-ROM.