Filter
Top Products
62
3. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’
button on your wireless access point (the button used to activate
WPS standby mode may have another name), or use other way
to start WPS standby mode as the instruction given by your
wireless access point’s user manual.
4. Before you start to establish the wireless connection by using
WPS, you can click ‘Rescan’ button to search for WPS-enabled
access points near you, to make sure the WPS function of your
access point is activated.
All access points with WPS function enabled will be displayed.
Please make sure the access point you wish to connect is
displayed. If not, please click ‘Rescan’ few more times. You can
also click ‘Information’ button to see the detailed information about
selected access point.