Filter
Top Products
19
CHAPTER II: DRIVER INSTALLATION AND
CONFIGURATION
2-1 Network Card Installation
Please follow the following instructions to install your new USB
wireless network card:
EW-7318USg/ EW-7318Ug / EW-7718Un / EW-7717Un
1. Fasten the antennas to the antenna connectors on the network
card by clockwise direction. (EW-7318USg only)
2. Insert the USB wireless network card into an empty USB 2.0 port
of your computer when computer is switched on.
Never use force to insert the card, if you feel it’s stuck,
flip the card over and try again.
3. The following message will appear on your computer, click
‘Cancel’.