Filter
Top Products
33
8.1.6. System
The “System” allows users to setup the camera’s parameters, like camera name, data/time setting. And also
provide firmware upgrade and reset tools at this page.
System
Camera Name
The default camera name is “IC1500 or IC1500Wg”. It is recommended to name
a meaningful name for the camera.
Login Name
Setup your administrator account’s login name. Default name is “admin”
Password
Enter up to 4 digits password for the new user account.
Confirm Password
Enter the password again to confirm the setting.
Set Date/Time manually
Set the current Date and Time.
NTP Server
Synchronize the Date and Time with NTP server.
Time Zone
Select the time zone that your camera put on.
NTP Server
Specify the IP Address of the NTP Server.
Upgrade Firmware
You can upgrade camera’s firmware via this function. Press the browse button,
find the correct firmware and press upgrade.
Reset to Factory Defaults
If you want to reset all the camera settings to default, click this button.
Reboot Device
To reboot the Internet Camera, click “Reboot”.
LED Setting
There are four LEDs to indicate the status of Internet Camera. If you wan to
secure the camera from noticing, you can turn off the LED light by clicking “LED
Light OFF”. To turn on the LED light, click “LED Light ON”.