Eiki LC-X85 Projector User Manual


  Open as PDF
of 88
 
53
This function allows you to customize the screen logo with Logo
select, Capture, and Logo PIN code lock functions.
Logo
✔Note:
•Beforecapturinganimage,select“Standard”intheImage
SelectMenutocaptureaproperimage.(pp.42,46)
•AsignalfromacomputercanbecaptureduptoXGA(1024X
768).
•Certainsignalsmaynotbecapturedproperly.
•Whencapturingtheimagethathasbeenadjustedbythe
Keystonefunction,theadjusteddataisautomaticallyresetand
theprojectorcapturesanimagewithoutkeystonecorrection.
•Whenstartingtocaptureanewimage,thepreviouslystored
imageisclearedevenifyoucancelthecapturing.
•OnceyouexittheLogoMenuaftersettingtheLogolockto
"On,"youarerequiredtoenterthePINcodeeveryattemptingto
changetheLogosetting.
•“User”cannotbeselectedwhentheimageisnotcaptured.
Select [Yes]
to capture
the projected
image.
This function decides on the starting-up display from among the
following options.
User . . . Show the image you captured.
Default . Show the factory-set logo.
Off . . . . Show the countdown display only.
Capture
Select [Yes] to stop
capturing.
Logo select
Logo
✔Note:
•When“On”isselectedintheLogoPINcodelockfunction,Logo
selectandCapturefunctionscannotbeselected.
This function enables you to capture an image being projected to
use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the
projected image.
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image will be
displayed the next time you turn on the projector.
To cancel the Capture function, select [No].
Set the red frame pointer
to the item and press the
SELECT button.
Capture
Set the pointer (red
arrow) to the item and
press the SELECT button.
Setting
Background
The selected background screen will be displayed when no input
signal is detected.
Blue . . . Blue colored background.
User . . . The image you captured.
Black. . . Black colored background.
✔Note:
•“User”cannotbeselectedwhentheimageis
notcaptured.
 previous next