Filter
Top Products
46
This symbol on the nameplate means the product is Listed by Underwriters Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of
fire, casualty and electrical hazards.
Appendix
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist
after following all operating instructions,
contact the dealer where you purchased the projector or the
service center.
Give the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity mark of the European Community (EC).
The Remote Control
does not work.
–
Check the batteries.
–
Make sure no obstruction is between the projector and remote control.
–
Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m).
–
Make sure the code of the remote control is conformed to the projector. (See page 14,
40.)
– Unlock Key lock for the remote control in the Setting Menu. (See page 40.)
Problem:
– Try these solutions.
Wireless Mouse function
does not work.
–
Make sure your computer is connected to the projector with a USB cable.
–
Check cable connection between the projector and your computer.
–
Check the mouse setting on your computer.
Computer 2 cannot be
selected.
The Terminal item
cannot be selected.
–
The Terminal item in the Setting Menu cannot be selected after Computer 2 is selected.
Select other input source such as Computer 1 or Video with the INPUT button on the top
control, the COMPUTER button or the VIDEO button on the remote control so that the
Terminal item can be selected.
–
Select Computer 2 at the Terminal item in the Setting Menu. (See “Terminal” on page
39.)