Filter
Top Products
58
Chapter 6 Basic setting and operation
✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector is used
without resetting the lamp counter, the alert mail is sent to users in every power-on of the pro-
jector. This alert mail will not be sent when the mail sending condition "When the life span of
lamp is reached" is unchecked.
● When lamp corres. value reaches preselect use time:
✐ The projector sends a free message when the lamp use time (Corresponding value) reaches
the preselected lamp use time. It can be used for preparation of the lamp replacement and the
maintenance required.
TITLE: Message from projector
10-03-2007 00:59
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*The accumulated lamp use time reaches 1800 hours.
Prepare for the lamp replacement.
Discretional messages
● When PJ lamp replacement time is reached:
TITLE: Message from projector
10-03-2007 00:59
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*The PJ lamp replace time is reached.